| 近五年发表的论文、专著、实践类教材（2015-2018年） |
| 序号 |
名 称 |
作者 |
时 间 |
发表刊物/出版社 |
备 注（限100字） |
| 1 |
Humanoid design of mechanical fingers using a motion coupling and shape-adaptive linkage mechanism |
张翼 |
2018 |
Journal of Bionic Engineering |
SCI |
| 2 |
Scaling effects in spiral capsule robots |
梁亮 |
2017 |
Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine |
SCI |
| 3 |
Mechanical Properties and Degradation Behavior of Mg (100-7x) Zn6xYx (x= 0.2, 0.4, 0.6, 0.8) Alloys |
熊汉青 |
2018 |
Metals |
SCI |
| 4 |
Improved Discharge Performance of Mg-6Al-7Pb Alloy by Microalloying with Ce |
吴懿萍 |
2018 |
International Journal ofElectrochemicalScience |
SCI |
| 5 |
Axial-Flow Blood Pump Acceleration Control Method Based on a Start-Up Process Dynamic Model |
许焰 |
2018 |
Transactions of the Canadian Society for Mechanical Engineering |
SCI |
| 6 |
Performance analysis and parameter optimization of an inner spiral in-pipe robot |
梁亮 |
2016 |
Robotica |
SCI |
| 7 |
Numerical analysis and experimental investigation of combined erosion of cavitation and sandy water erosion9 |
庞佑霞 |
2016 |
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology |
SCI 4区 |
| 8 |
Operational numerical simulation of a four-spiral in-pipe robot |
梁亮 |
2015 |
Simulation-Transactions of the Society for Modeling and Simulation International |
SCI |
| 9 |
Effect of cavitation sources on combined erosion of sandy water and cavitation erosion |
梁亮 |
2015 |
Journal of the Balkan Tribological Association |
SCI |
| 10 |
Dynamical modelling and structural parameter optimization of a novel spiral in-pipe robot |
梁亮 |
2016 |
International Journal of Robotics and Automation |
SCI |
| 11 |
Overall performance optimization of a spiral pipe type heater by fluid- structure interaction modeling and partitioning screening method |
郭磊 |
2018 |
Case Studies in Thermal Engineering |
EI |
| 12 |
Study on driving performance of the axial flow blood pump under the condition of large gap |
许焰 |
2017 |
International Journal of Rotating Machinery |
EI |
| 13 |
结合SVM和改进证据理论的多信息融合故障诊断 |
向阳辉 |
2015 |
振动与冲击 |
EI |
| 14 |
多分类SVM的代价敏感加权故障诊断方法 |
向阳辉 |
2015 |
振动、测试与诊断 |
EI |
| 15 |
花炮机械引线及封泥设备设计方法研究 |
史春雪 |
2018 |
化学工业出版社 |
专著 |
| 16 |
汽车声品质有源控制方法 |
聂永红 |
2018 |
西安交通大学出版社 |
专著 |
| 17 |
水下采矿机器人环境建模及路径规划技术研究 |
史春雪 |
2017 |
化学工业出版社 |
专著 |
| 18 |
流体机械的磨损与减摩技术 |
庞佑霞 |
2016 |
机械工业出版社 |
专著 |
| 19 |
工程机械设计指导 |
庞小兵 |
2017 |
化学工业出版社 |
教材 |
| 20 |
工程机械实训指导 |
史春雪 |
2017 |
化学工业出版社 |
教材 |
| 21 |
电子技术 |
刘辉（副主编） |
2015 |
清华大学出版社 |
教材 |
（校核：付卓 编辑：程立志 审核：朱宗铭 更新时间：2019-08-30）
